C 1500 Truck 2WD V6-4.3L VIN W (2001)
1.1.
Install the J 38834-3 onto the short threaded end of the J 38834-1.
1.2.
Install the J 38834 nut, the washer, and the bearing on the long threaded end of the J 38834-1.
1.3.
Install the J 38834-2 onto the J 38834-1 so that the smaller diameter of the J 38834-2 will be facing the front of the engine block.
1.4.
Install the J 38834-2 on the inside of the balance shaft front bearing bore.
1.5.
Lubricate the NEW balance shaft rear bearing with clean engine oil.
1.6.
Install the balance shaft rear bearing onto the J 38834-2.
1.7.
Align the balance shaft rear bearing for installation.
1.8.
Using a wrench secure the J 38834-1 into place.
1.9.
Rotate the J 38834 nut until the balance shaft rear bearing is properly and completely pushed into the balance shaft rear bearing bore.
2. Remove the J 38834.
3. Install the balance shaft.