C 1500 Truck 2WD V6-4.3L VIN W (2001)
4. Install the valve rocker arm cover bolts.
^
Tighten the valve rocker arm cover bolts to 12 Nm (106 inch lbs.).
5. Install the PCV valve hose assembly to the intake manifold and the valve rocker arm cover.
6. Connect the power brake booster vacuum hose to the intake manifold and the vacuum brake booster.
7. Reposition the engine wiring harness.
8. Install the engine wiring harness bracket and the nuts to the lower intake manifold studs.
^
Tighten the engine wiring harness bracket nuts to 12 Nm (106 inch lbs.).
9. Install the bolt for the engine wiring harness clip to the positive battery cable junction block bracket.
^
Tighten the engine wiring harness clip nut to 9 Nm (80 inch lbs.).