C 1500 Truck 2WD V6-4.3L VIN W (2001)
4. Install the valve rocker arm cover bolts.
^
Tighten the valve rocker arm cover bolts to 12 Nm (106 inch lbs.).
5. Reposition the engine wiring harness.
6. Reposition the heater hoses.
7. Install the heater hose bracket bolt.
^
Tighten the bracket bolt to 25 Nm (18 ft. lbs.).
8. Install the AIR pipe assembly to the exhaust manifold.
9. Connect the AIR pipe assembly to the AIR pump and the AIR crossover pipe.
10. Align the hinge clip with the lip on the throttle body.
Install the air inlet tube and resonator to the throttle body by pivoting the air inlet tube and resonator downward until the mounting stud is through
the hole in the air inlet tube.
