C 1500 Truck 2WD V6-4.3L VIN W (2001)
10.2.
Tighten the bolts on the second pass in sequence (1-8) to 12 Nm (106 inch lbs.).
10.3.
Tighten the bolts on the final pass in sequence (1-8) to 15 Nm (11 ft. lbs.).
11. Position the power steering pump mounting bracket.
12. Install the three bolts and the nut.
Notice: Refer to Fastener Notice in Service Precautions.
13. Install the front nut for the power steering pump rear bracket.
^
Tighten the power steering pump mounting bracket bolts, the nut, and the power steering pump rear bracket nuts to 41 Nm (30 ft. lbs.).
14. Install the drive belt.
15. Install the EGR valve inlet pipe to the intake manifold and the exhaust manifold.
15.1.
Tighten the EGR valve inlet pipe intake manifold nut to 25 Nm (18 ft. lbs.).
15.2.
Tighten the EGR valve inlet pipe exhaust manifold nut to 30 Nm (22 ft. lbs.).
15.3.
Tighten the EGR valve inlet pipe clamp bolt 25 Nm (18 ft. lbs.).
16. Install the spark plug wire harness retainer on the EGR valve inlet pipe.
17. Install the PCV valve hose assembly to the intake manifold and the valve rocker arm cover.
