C 1500 Truck 2WD V6-4.3L VIN W (2001)
15. Disconnect the following electrical connections:
^
The Manifold Absolute Pressure (MAP) sensor(2)
^
The EVAP canister purge solenoid valve (1)
16. Remove the two nuts holding the engine wiring harness bracket to the upper intake manifold studs.
17. Remove the engine wiring harness bracket from the studs.
18. Remove the nut holding the engine wiring harness bracket to the stud at the EVAP canister purge solenoid valve.
19. Remove the nut and the ground wire from the engine wiring harness bracket stud at the rear of the right cylinder head.
20. Remove the stud holding the engine wiring harness bracket.
21. Move the engine wiring harness and the engine wiring harness brackets aside.
22. Remove the EVAP canister purge solenoid valve.