C 1500 Truck 2WD V6-4.3L VIN W (2001)
![background image](/gmc/c_1500_truck_2wd/v6-4.3l_vin_w/Page-604002.png)
1. Install the filter neck seal.
2. Install the oil filter.
3. Install the oil pan gasket to the pan.
4. Install the magnet into the bottom of the pan.
Notice: Refer to Fastener Notice in Service Precautions.
5. Install the oil pan to the transmission with seventeen bolts.
^
Tighten the oil pan bolts to 11 Nm (97 inch lbs.).
6. Apply a small amount of sealant GM P/N 12346004 to the treads of the drain plug, if equipped.
7. Install the oil pan drain plug, if equipped.
^
Tighten the oil pan drain plug to 18 Nm (13 ft. lbs.).
8. Lower the vehicle.
9. Fill the transmission to the proper level with Dexron III transmission fluid.