C 1500 Truck 2WD V6-4.3L VIN W (2001)
Tighten
Tighten the fuel feed and return pipe fittings to 28 N.m (21 lb ft).
10. Install the fuel pipes into the bell housing stud clip (3).
Tighten
Tighten the fuel pipe clip nut to 25 N.m (18 lb ft).
11. Tighten the fuel filler cap.
12. Connect the negative battery cable.
13. Inspect for leaks using the following procedure:
13.1. Turn ON the ignition, with the engine OFF for 2 seconds.
13.2. Turn OFF the ignition for 10 seconds.
13.3. Turn ON the ignition, with the engine OFF.
13.4. Inspect for fuel leaks.
