C 1500 Truck 2WD V6-4.3L VIN W (2001)
7. Install the bolt holding the bracket for the wiring harness and the A/C hose, if equipped, to the generator mounting bracket.
Tighten
Tighten the wiring harness bracket bolt to 25 N.m (18 lb ft).
8. Install the drive belt.
9. Install the engine cooling fan. Refer to Fan Clutch Replacement in Cooling System.
10. Align the hinge clip with the lip on the throttle body.
Install the air inlet tube and resonator to the throttle body by pivoting the air inlet tube and resonator downward until the mounting stud is through
the hole in the air inlet tube.