C 1500 Truck 2WD V6-4.3L VIN W (2001)
11. Remove the pitman shaft (4) from the side cover (8).
Assembly Procedure
1. Screw the pitman shaft (4) to the side cover (8) until it fully seats to the side cover (8).
2. Install the adjuster lock nut (1). Do not tighten the adjuster lock nut (1) until the pitman shaft adjustment is completed.
3. Install the pitman shaft assembly (4) and the side cover (8) to the steering gear housing (7).
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the bolts (2).
-
Tighten the bolts (2) to 60 Nm (45 ft. lbs.).
5. Install the lock washer (2).
6. Install the nut (3).
7. Refer to Pitman Shaft Over-Center Preload Adjustment - Off Vehicle to adjust the pitman shaft.
670 Gear
Disassembly Procedure
