C 1500 Truck 2WD V6-4.3L VIN W (2001)
![background image](/gmc/c_1500_truck_2wd/v6-4.3l_vin_w/Page-2555023.png)
10. Install the pitman shaft and the side cover. Refer to Steering Gear Pitman Shaft and Housing Cover Replacement - Off Vehicle.
11. Install the pitman arm (4) to the steering gear.
12. Install the lock washer (2).
13. Install the nut (3).
14. To adjust the pitman shaft, refer to Pitman Shaft Over-Center Preload Adjustment - Off Vehicle.
Steering Gear Check Valve Replacement
Disassembly Procedure
Important: Do not to damage the threads of the steering gear housing when removing the check valve. Remove the check valve (1) from the steering
gear housing (2) using a small screwdriver.
Assembly Procedure
Install the check valve (1) using a 3/8 inch diameter piece of tubing 100 mm (4 inch) long to drive into the steering gear housing.