C 1500 Truck 2WD V6-4.3L VIN W (2001)
1. Move the control valve assembly (4) into position under the main housing. Engage the pin (1) in the manual selector valve (2) into the slot in the
detent lever (3).
2. Align the control valve assembly (1) with the dowel pins (2) in the main housing. Seat the control valve assembly against the main housing and
hold it in position.
3. Install one bolt marked (1) to hold the control valve assembly in place.
Notice: Refer to Fastener Notice in Service Precautions.
4. Reinstall the remaining 14 bolts marked (1) that fasten the control valve assembly to the main housing.
^
Tighten the bolts to 12 Nm (108 inch lbs.).