C 1500 Truck 2WD V8-350 5.7L (1989)
Figure 1
8.
Make the following connections (see Figure 1).
*
Red wire to terminal E of high blower motor relay connector and to the junction block connection located on the cowl.
*
Black wire to blower motor case mounting bolt for chassis ground. Choose the nearest bolt and scrape lightly around the bolt hole to assure a
good ground.
*
Remaining end of black wire to terminal A of high blower motor relay connector.
*
Brown wire to terminal D high blower relay connector and terminal 52 of resistor block.