C 1500 Truck 2WD V8-4.8L VIN V (2000)
Drink Holders: Procedures
Cupholder Replacement
REMOVAL PROCEDURE
1. Tilt the cupholder down.
2. Remove the screws holding the cupholder to the instrument panel (IP).
3. Remove the cupholder from the vehicle.
INSTALLATION PROCEDURE
1. Position the cupholder to the IP.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the screws holding the cupholder to the IP.
Tighten
Tighten the screws to 2 N.m (18 lb in).
3. Return the cupholder to the up position.
Cupholder Replacement - Front Floor Console
REMOVAL PROCEDURE
1. Open the cup holder by pulling down from the rear of the floor console.