C 1500 Truck 2WD V8-4.8L VIN V (2000)
![background image](/gmc/c_1500_truck_2wd/v8-4.8l_vin_v/Page-3662016.png)
2. Remove the rear window upper garnish molding from the roof panel.
Slide the nylon slipstick, or the equivalent, between the roof panel and the garnish molding near the clips.
3. Pull the rear window upper garnish molding downward while performing the previous step.
Installation Procedure
1. Install the rear window upper garnish molding to the rear body panel.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the retainer screws, if equipped.
Tighten the rear window upper garnish molding screws to 2 N.m (18 lb in).
Third Pillar Trim Replacement
Third Pillar Trim Replacement
Removal Procedure
1. Remove the rear door sill trim plate.
2. Remove the lower rear seat belt bolt.
3. Remove the trim panel from the vehicle.
Installation Procedure
1. Install the body side lower trim panel to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the lower seat belt bolt.