C 1500 Truck 2WD V8-4.8L VIN V (2000)
6. Lift the seat cushion up off the rear plastic holders (1) on the underside of the seat cushion, and pull forward.
7. Remove the seat switch bezel.
8. Remove the lumbar actuator (5).
9. Unclip the seat trim cover from the seat cushion frame.
10. Using a side motion, carefully separate the seat cushion trim cover from the seat cushion pad.
11. Remove the pad from the seat cushion frame.
12. Remove the seat cushion heater element, if equipped.
Installation Procedure
1. Install the seat cushion heater element, if equipped.
2. Install the seat cushion pad to the seat cushion frame.