C 1500 Truck 2WD V8-4.8L VIN V (2000)
Power Door Lock Switch: Procedures
REMOVAL PROCEDURE
1. Remove the power accessory switch panel.
2. Disconnect the wiring connector.
3. Remove the screws.
4. Remove the power window and door lock switch assembly from the panel.
INSTALLATION PROCEDURE
1. Install the power door lock and power window switch assembly to the switch panel, sliding the front tabs in first. Rock the switch down in order to
seat the door lock switch completely.
2. Install the screws.
3. Connect the wiring connector.
4. Install the power accessory switch plate.