C 1500 Truck 2WD V8-4.8L VIN V (2000)
8.1.
Push the mud flap to make contact with the rear side of the underbody cross sill and mark the location of the hole (3) of the mud flap.
8.2.
Center punch the marked location and drill a 5.159 mm (13/64 in) hole.
8.3.
Install the screw.
Tighten
Tighten the screw to 4 N.m (35 lb in).
8.4.
Repeat the above steps for hole locations 4 and 6.
9.
For vehicles with long box, use the following procedure: