C 1500 Truck 2WD V8-4.8L VIN V (2000)
4. Disconnect the EVAP purge solenoid electrical connector.
5. Remove the EVAP purge solenoid mount bolt (2).
6. Remove the EVAP purge solenoid (3) and the insulator (1) from the engine.
INSTALLATION PROCEDURE
1. Install the insulator (1) on the EVAP purge solenoid (3).
2. Install the EVAP purge solenoid (3) to the engine.
NOTE: Refer to Fastener Notice in Cautions and Notices.
3. Install the EVAP purge solenoid mount bolt (2).
Tighten
Tighten the EVAP purge solenoid mount bolt to 10.5 N.m (93 lb in)