C 1500 Truck 2WD V8-4.8L VIN V (2000)
18. Separate the two banana plugs on the SIR deployment harness.
IMPORTANT
^
he rapid gas expansion involved with deploying an air bag is very loud. Notify all people in the immediate area that you intend to deploy the
inflator module.
^
When the air bag deploys, the inflator module may jump vertically. This is a normal reaction of the inflator module to the force of the rapid gas
expansion inside the air bag.
19. Connect the SIR deployment harness wires to the power source.
20. Disconnect the SIR deployment harness from the power source after the air bag deploys.
21. Seat one banana plug into the other in order to short the deployment harness leads.
22. If the air bag did not deploy, disconnect the adapter and discontinue the procedure. Contact the Technical Assistance Group. Otherwise, proceed to
the following steps.
CAUTION: Refer to Deployed inflator modules are hot Caution in Cautions and Notices.