C 1500 Truck 2WD V8-4.8L VIN V (2000)
4. Remove the boot clamp (1) from the rack and pinion boot with side cutters.
5. Discard the boot clamp (1).
Important: Prior to removing the breather tube or the rack and pinion boot, mark the location of the breather tube on the gear assembly.
6. Remove the rack and pinion boot (1) and the breather tube from the rack and pinion gear assembly.
Assembly Procedure
-
Tools Required
-
J 22610 Service Boot Clamp Installer
1. Install the new boot clamp (2) onto the rack and pinion boot (1).