C 1500 Truck 2WD V8-4.8L VIN V (2000)
![background image](/gmc/c_1500_truck_2wd/v8-4.8l_vin_v/Page-2789012.png)
8. Install the remaining rack piston balls (3) into the ball guide (1) using grease at each end (2) to retain the rack piston balls (3).
9. Install the ball guide (5) to the rack piston (4).
10. Install the ball guide clamp (6).
Notice: Refer to Fastener Notice In Service Precautions.
11. Install the screws (7).
-
Tighten the screws (7) to 58 Nm (43 inch lbs.).
12. Insert J 21552 into the bore of the rack piston while turning the worm shaft counterclockwise. The turning of the worm shaft forces the rack piston
onto J21552. The rack piston balls remain in place.
13. Install the flat races (2) (4) and the thrust bearing (3) onto the worm shaft (1).