C 1500 Truck 2WD V8-4.8L VIN V (2000)
1. Install the 2-4 servo assembly into the 2-4 servo bore.
2. Install the J29714-A
3. Tighten the bolt in order to compress the servo cover.
4. Install the servo cover retaining ring.
5. Remove the J29714-A from the oil pan flange.
Notice: Refer to Fastener Notice in Service Precautions.
6. Install the oil pan bolt.
Tighten the oil pan bolt to 11 Nm (97 inch lbs.).
7. Lower the vehicle.
8. Check the automatic transmission fluid level. Refer to Fluid Capacity.