C 1500 Truck 2WD V8-4.8L VIN V (2000)
Valve Body: Service and Repair
4L80-E Automatic Transmission
^
Tools Required
-
J 25025 Guide Pins
-
J 36850 Transjel
Removal Procedure
Important: The five O-rings should remain attached to the TFP valve position switch.
1. Remove the transmission fluid pressure (TFP) manual valve position switch bolts (1) and the TFP valve position switch (2).
2. Remove the control valve assembly bolts (4).
3. Remove the fluid level indicator stop bracket.
4. Remove the lube oil pipe retainer (7) and the clamp.
5. Remove the lube oil pipe (5).
6. Remove the manual shaft detent spring assembly (3).
7. Remove the control valve assembly (2) which includes the following:
^
The accumulator housing assembly(1)
^
The control valve assembly to the spacer plate gasket
^
The spacer plate
^
The accumulator gasket