C 1500 Truck 2WD V8-4.8L VIN V (2000)
![background image](/gmc/c_1500_truck_2wd/v8-4.8l_vin_v/Page-2310002.png)
Installation Procedure
^
Tools Required
-
J 22834 Extension Housing Seal Installer
1. Using J 22834 install the new rear oil seal into the extension housing.
2. Ensure J22834 is centered on the seal during installation.
3. If the vehicle is equipped with a P model NV4500 transmission, install the following components:
^
Install the spline seal.
^
Install the washer.
^
Install the mainshaft nut.