C 1500 Truck 2WD V8-6.0L VIN U (2002)
1. Inspect the cylinder lines (1) for the following items:
^
Cracks
^
Dents
^
Damage to the threads
2. Replace the parts as needed.
3. Install the new O-ring seals (1) to the valve end of the cylinder lines.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the cylinder line assemblies (1) to the gear assembly (2).
^
Tighten the valve end fittings to 16.9 Nm (12.6 ft. lbs.)
^
Tighten the cylinder end fittings to 27 Nm (20 ft. lbs.)
Steering Gear Housing End Plug Replacement - Off Vehicle
Steering Gear Housing End Plug Replacement - Off Vehicle
Disassembly Procedure
