C 1500 Truck 2WD V8-6.0L VIN U (2002)
Axle Bearing: Adjustments
Rear Wheel/Axle Bearing Adjustment
Wheel Bearing Adjustment (10 1/2 Inch Ring Gear)
Wheel Bearing Adjustment
Preliminary Inspection
Important: Ensure the brakes are fully released and do not drag.
Pull or push the tire at the top back and forth in order to test the wheel bearing play.
^
Use a pry bar under the tire as an alternative.
^
If the wheel bearing adjustment is correct, the movement will be barely noticeable.
^
If the movement is excessive, adjust the bearings.
Adjustment Procedure
^
Tools Required
-
J 2222-C Wheel Bearing Nut Wrench
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the axle shaft.
3. Remove the hub adjuster nut retaining ring.
4. Remove the adjuster nut lock key.
