gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Lifter / Lash Adjuster, Valve > < Camshaft, Engine|Specifications|Page 2189
Page 3
background image

5. Install the timing chain and sprockets to the camshaft. 
6. Install the valve lifters to the engine block. 
7. Install the cylinder head assembly to the engine block. 
8. Install the oil pump drive to the engine block.
9. Install the radiator to the vehicle. 

10. Install the air conditioning condenser in the vehicle. 
11. Install the front grille and parking lamp assembly.
12. Refill the cooling system. 
13. Recharge the A/C system. 
14. Connect the battery negative cables to the batteries. 
15. Perform the TDC off set timing procedure. 

Lifter / Lash Adjuster, Valve > < Camshaft, Engine|Specifications|Page 2189