C 1500 Truck 2WD V8-6.5L DSL Turbo VIN F (1998)
Air Bag Control Module: Service and Repair
Installation Procedure
Description
1. Install the SDM (1) to the vehicle (4).
2. Install the SDM mounting fasteners (2).
Tighten
^
Tighten fasteners to 12 N.m (106 lb in).
NOTICE: Refer to Fastener Notice in Vehicle Damage Warnings.
3. Install the SDM harness connector (3) to the SDM.
4. Install the Connector Position Assurance (CPA) to the SDM harness connector.
5. Position the carpet to cover the inflatable restraint Sensing and Diagnostic Module (SDM).
6. Install the carpet retaining sill trim molding - LH.
7. Install the driver seat.
8. Enable the SIR system. Refer to Enabling the SIR System.
