C 1500 Truck 2WD V8-6.5L DSL Turbo VIN S (1997)
Air Bag Control Module: Service and Repair
Repair of Mounting Studs and/or Bracket
Important
The following repair procedures should only be used in the ever it that the inflatable restraint Sensing arid Diagnostic Module (SDM) mounting studs
and/or fasteners are damaged to the extent that the SDM can no longer be properly mounted.
1. Cut off weld-stud from SDM bracket.
2. Drill out remaining portion of stud with 7.0 mm (0.28 inch) drill bit.
3. Install 6x1 mm bolts (GM P/N 11507029) from top side of SDM into nuts (GM P/N 11513875) on bottom side of SDM bracket.
