C 1500 Yukon 2WD V8-4.8L VIN V (2000)
Seals and Gaskets: Service and Repair
NV 4500 Manual Transmission
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the rear propeller shaft. Refer to Propeller Shaft Replacement - One Piece or Propeller Shaft Replacement - Two Piece.
3. If the vehicle is equipped with a P model NV4500 transmission, perform the following:
^
Remove the mainshaft nut.
^
Remove the washer.
^
Remove the spline seal.
4. If the vehicle is equipped with a C model NV4500 transmission, perform the following:
^
Remove the mainshaft nut.
^
Remove the washer.
^
Remove the yoke.
5. Remove the rear oil seal from the extension housing.