C 1500 Yukon 2WD V8-5.3L VIN Z Flex Fuel (2003)
![background image](/gmc/c_1500_yukon_2wd/v8-5.3l_vin_z_flex_fuel/Page-3396007.png)
9. Remove the hinge.
Installation Procedure
1. Clean and prepare the pillar surfaces in order to ensure a flush fit of the service hinge and the fasteners.
Important: Prior to refinishing, refer to GM 4901MD-99 Refinish Manual for recommended products. Do not combine paint systems.
Refer to paint manufacturer's recommendations.
2. Apply an approved anti-corrosion primer.
3. Apply full-body caulk to the entire hinge mounting surface.
4. Position the service hinge within the scribe marks on the pillar.
Notice: Refer to Fastener Notice in Service Precautions.