C 1500 Yukon 2WD V8-5.3L VIN Z Flex Fuel (2003)
Drink Holders: Service and Repair
Cupholder Replacement (Luxury)
Cupholder Replacement (Luxury)
Removal Procedure
1. Remove the upper trim bezel from the center console.
2. Insert a flat bladed tool between the console and cupholder assembly.
3. Remove the cupholder assembly by prying the cupholder to release the clips (2).
4. Remove the wire connector for the cupholder.
5. Remove the cupholder from the console.
Installation Procedure
1. Place the cupholder assembly over the console.
2. Connect the wire connector to the cupholder assembly.
3. Push on the corners of the cupholder assembly till all the retaining clips (2) are seated.
4. Install the upper trim bezel.