C 1500 Yukon 2WD V8-5.3L VIN Z Flex Fuel (2003)
2. Pull down on the upper corners of the garnish molding in order to disengage the retaining clips.
3. Pull in order to disengage the remaining retaining clips.
4. Remove the rear corner garnish molding from the vehicle.
5. Inspect the rear corner garnish molding for broken or missing retaining clips. Replace the retaining clips as needed.
INSTALLATION PROCEDURE
1. Install the rear corner garnish molding to the vehicle.
2. Press on the rear corner garnish molding in order to engage the retaining clips.
3. Install the rear upper garnish molding.
Garnish Molding Replacement - Rear Upper
GARNISH MOLDING REPLACEMENT - REAR UPPER
TOOLS REQUIRED
J 38778 Door Trim Pad Clip Remover
REMOVAL PROCEDURE