C 1500 Yukon 2WD V8-5.3L VIN Z Flex Fuel (2003)
1. Install the EBCM to the BPMV.
Note: Refer to Fastener Notice in Cautions and Notices.
2. Install the new EBCM screws (1).
-
Tighten the screws to 5 N.m (39 lb in) in an X-pattern.
3. Lower the vehicle.
4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure.
5. Revise the tire calibration using the Scan Tool Tire Size Calibration function.
6. Return to Diagnostic Starting Point - Antilock Brake System.