C 1500 Yukon 2WD V8-5.3L VIN Z Flex Fuel (2003)
Engine Mount: Service and Repair
Engine Mount Bracket
Left
Engine Mount Bracket Replacement - Left
Removal Procedure
1. Remove the engine mount.
2. Remove the engine mount bracket bolts.
3. Remove the engine mount bracket.
Installation Procedure
1. Install the engine mount bracket.
Notice:
Refer to Fastener Notice in Service Precautions.
See: Service Precautions/Vehicle Damage Warnings/Fastener Notice
2. Install the engine mount bracket bolts.
Tighten the engine mount bracket bolts to 75 Nm (55 ft. lbs.).
3. Install the engine mount.
Right
Engine Mount Bracket Replacement - Right
Removal Procedure
1. Remove the engine mount.