C 1500 Yukon 2WD V8-5.3L VIN Z Flex Fuel (2003)
Heat Shield: Service and Repair
Exhaust Heat Shield
Exhaust Heat Shield Replacement
Removal Procedure
1. Remove the exhaust muffler
2. Remove the exhaust heat shield bolts.
3. Remove the exhaust heat shield.
Installation Procedure
1. Install the exhaust heat shield.
Notice:
Refer to Fastener Notice in Service Precautions.
See: Service Precautions/Vehicle Damage Warnings/Fastener Notice
2. Install the exhaust heat shield bolts.
Tighten the bolts to 9 Nm (80 inch lbs.).
3. Install the exhaust muffler.