C 1500 Yukon 2WD V8-5.3L VIN Z Flex Fuel (2003)
2. Install the wheel hub and bearing retaining bolts.
Tighten
Tighten the bolts to 140 N.m (103 lb ft).
3. Install the wheel drive shaft retaining nut.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the nut to 250 N.m (184 lb ft).
4. Install the retainer (3) and cotter pin (2) to the wheel drive shaft nut.
5. Install the dust cap (4).
6. Install the outer tie rod to the steering knuckle.
7. Install the brake rotor.
8. Install the tire and wheel.
9. Lower the vehicle.