C 1500 Yukon 2WD V8-5.3L VIN Z Flex Fuel (2003)
9. Remove the upper anchor bolt.
10. Remove the retractor from the seat.
Installation Procedure
1. Position the seat belt retractor onto the seat. Line up the tab on the retractor to the tab on the seat frame.
2. Install the upper anchor bolt.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the bolt to 53 N.m (39 lb ft).
3. Install the retractor tower cover.
4. Install the retractor tower cover retaining screw.
Tighten
Tighten the screw to 2 N.m (18 lb in).