gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Sensors and Switches - Wiper and Washer Systems > < Power Window Switch Replacement - Rear Door|Page 5742
Page 3
background image

Tighten the screw to 2 N.m (18 lb in).

4. Connect the electrical connectors.
5. Install the front door trim panel.
6. If equipped with camper mirrors program the door module. Refer to Service Programming System (SPS) (Remote Procedure) Service

Programming System (SPS) (Pass-Thru Procedure) Service Programming System (SPS) (Off Board Remote Procedure)Service Programming
System (SPS) (Off Board Pass-Thru Procedure) in Programming.

Sensors and Switches - Wiper and Washer Systems > < Power Window Switch Replacement - Rear Door|Page 5742