C 1500 Yukon 2WD V8-5.3L VIN Z Flex Fuel (2003)
1. Install the bracket (3) to the rear of the pump (1).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the rear bracket retaining nuts to 50 N.m (37 lb ft).
2. Install the power steering pump.
3. Install the bolt retaining the rear bracket to the engine.
4. Install the bolts to the front of the pump.
Tighten
Tighten the bolts to 50 N.m (37 lb ft).
5. Install the power steering pump return hoses (2,4) to the power steering pump and install the retaining clamps.