C 1500 Yukon 2WD V8-5.3L VIN Z Flex Fuel (2003)
5. Connect lower ball joint stud to the steering knuckle.
6. Install the wheel drive shaft.
7. Install the nut to the lower ball joint stud.
Tighten
Tighten the nut to 100 N.m (74 lb ft).
8. Install the torsion bars.
9. Install the shock absorber lower nut and bolt.
10. Install the stabilizer shaft links to the lower control arm.
11. Install the tire and wheel.
12. Remove the safety stands.
13. Lower the vehicle.
14. Align the vehicle. Refer to Measuring Wheel Alignment (With Rear Wheel Steering) Measuring Wheel Alignment (Without Rear Wheel Steering)
in Wheel Alignment.