gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Suspension Control ( Automatic - Electronic ) > < Front Suspension|Page 16674
Page 2
background image

3. Install the stabilizer shaft link nut and bolt to the frame bracket.

NOTE:  Refer to Fastener Notice in Service Precautions.

Tighten
1. Tighten the link to frame bracket nut to 65 N.m (48 lb ft).
2. Tighten the ball stud to stabilizer shaft nut to 65 N.m (48 lb ft).

3. Lower the vehicle.

Suspension Control ( Automatic - Electronic ) > < Front Suspension|Page 16674