C 1500 Yukon 2WD V8-5.3L VIN Z Flex Fuel (2003)
1. Install the position sensor on the vehicle.
2. Install the bolt to the frame.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the bolts to 12 N.m (106 lb in).
3. Install the ESC sensor link bracket bolt to the upper control arm.
Tighten
Tighten the bolt to 9 N.m (80 lb in).
4. Install the wheel speed sensor wire from the ESC sensor bracket.
5. Install the wheel speed sensor wire to the ESC sensor bracket.
6. Connect the sensor harness connector to the vehicle harness connector.
7. Remove the safety stands.
8. Lower the vehicle.