gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Wheel Bearing > < Trailing Arm|Service and Repair
Page 2
background image

NOTE:  Refer to Fastener Notice in Service Precautions.

IMPORTANT:  Do not tighten the bolts unless the suspension is at the curb height position.

Tighten
Tighten the bolts to 105 N.m (77 lb ft).

4. Install the parking brake cable and retaining clips to the track bar.
5. Remove the rear axle support.
6. Lower the vehicle.

Wheel Bearing > < Trailing Arm|Service and Repair