C 1500 Yukon 2WD V8-5.3L VIN Z Flex Fuel (2003)
Differential Mount: Service and Repair
Differential Carrier Assembly Bushing Replacement
Differential Carrier Assembly Bushing Replacement
Tools Required
^
J33791 Carrier Bushing Remover/Installer
^
J36616 Axle Mount Bushing Remover/Installer
Removal Procedure
1. Remove the differential carrier assembly.
2. Remove the upper differential carrier assembly bushing by performing these steps:
2.1.
Install the J36616-2 (1), the J33791-1 (2), the thrust bearing (3), the J21474-18 (4), and the forcing screw as shown.
2.2.
Remove the upper differential carrier assembly bushing by holding the forcing screw and slowly tightening the J21474-18.
3. Remove the lower differential carrier assembly bushing by performing these steps:
3.1.
Install the J21474-18 (1), the thrust bearing (2), the J33791-1 (3), the J36616-2 (4), and the forcing screw as shown.
3.2.
Remove the lower differential carrier assembly bushing by holding the forcing screw and slowly tightening the J21474-18.
Installation Procedure