C 1500 Yukon 2WD V8-5.3L VIN Z Flex Fuel (2003)
![background image](/gmc/c_1500_yukon_2wd/v8-5.3l_vin_z_flex_fuel/Page-1980002.png)
^
The axle seals
10. Scribe an alignment line between the pinion shaft and the pinion yoke.
11. Install the J8614-01 onto the pinion as shown.
12. Remove the pinion nut while holding the J8614-01.
13. Install the J8614-2 (2) and the J8614-3 (3) into the J8614-01 (1) as shown.
14. Remove the pinion yoke by turning the J8614-3 (3) clockwise while holding the J8614-01 (1).
Important: Carefully remove the oil seal from the bore. Do not distort or scratch the aluminum case.
15. Remove the oil seal using a suitable seal removal tool.
Installation Procedure