gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

ABOUT US
Rear Axle Shaft Seal and/or Bearing Replacement (8.6 Inch Axle W/O JL4, 9.5 Inch Axle)|Page 12599 > < Rear Axle Shaft Seal and/or Bearing Replacement (8.6 Inch Axle W/O JL4, 9.5 Inch Axle)|Page 12597

C 1500 Yukon 2WD V8-5.3L VIN Z Flex Fuel (2003)

Page 2
background image

3. Install the axle shaft seal using the J21128.
4. Drive the tool into the bore until the axle shaft seal bottoms flush with the tube.
5. Install the axle shaft.
6. Install the rear axle housing cover.
7. Install the tire and wheel assembly. 
8. Fill the rear axle.
9. Lower the vehicle.

Rear Axle Shaft Seal and/or Bearing Replacement (8.6 Inch Axle W/O JL4, 9.5 Inch Axle)|Page 12599 > < Rear Axle Shaft Seal and/or Bearing Replacement (8.6 Inch Axle W/O JL4, 9.5 Inch Axle)|Page 12597