C 2500 3/4 Ton Pickup 2WD L6-292 4.8L VIN T 1-bbl (1982)
Distributor Thermal Vacuum Switch: Testing and Inspection
Fig. 38a - EGR EFE EMR Thermal Vacuum Switch
Below the switching point;
-
Ports 1 and 2 and 3 and 6 should be connected
-
Ports 4 and 5 should be sealed--Fig 38A.
Above the switching point;
-
Port 1 should be connected to Port 5
-
Port 2 should be connected to Port 6
-
Port 3 should be connected to Port 4.
NOTE: Refer to the number stamped on the base of the switch or valve for calibrated switching or activation temperatures.