C 2500 3/4 Ton Pickup 2WD V8-350 5.7L VIN M 4-bbl (1984)
Fig. 6 Engine mount replacement. C, K, P, R & V models w/V8 engines
Fig. 7 Engine mount replacement. G models w/V8 engines
V6 & V8 Engines
1.
Working from below frame mounting bracket, remove engine mount through bolt. When replacing right side mount on models with V6-262 engine
it is only necessary to loosen the through bolt.
2.
Raise and support engine, then remove mount attaching bolts and the mount. Raise engine only enough to gain sufficient clearance for
removal. Check for interference between rear of engine and cowl panel.
3.
Install new engine mount to engine, then tighten attaching bolts.
4.
Install and tighten engine mount through bolt.
