gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Wire Wheel Cover - Snapping/Creaking Noise|Page 5160 > < Wire Wheel Cover - Snapping/Creaking Noise|Page 5158
Page 15
background image

12 Stop burnish procedure

1st Stop

From 40 MPH taking 6 seconds to stop (10 FPS SQ)*

2nd Stop to
11th Stop

From 55 MPH taking 5 seconds to stop (15 FPS SQ)*

12th Stop

From 40 MPH taking 6 seconds to stop (10 FPS SQ)*

Drive 1/2 (0.5) miles between burnish stops.

Drive 4 miles after 12th stop to cool system.

To confirm  if vehicle is repaired, conduct series of 5 stops from 55 mph bringing vehicle to stop in 5 seconds (15 FPS SQ.) and compare to initial stops.

FIGURE 2

FIGURE NO. 3 - Ball Joint Turning Effort

If the lead condition still exists, perform the following procedure:

Wire Wheel Cover - Snapping/Creaking Noise|Page 5160 > < Wire Wheel Cover - Snapping/Creaking Noise|Page 5158